| Customization: | Available |
|---|---|
| Certification: | CE, ISO |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical Parameters of Roll Slitting Machine | Details |
|---|---|
| 1. Specifications | |
| a. Applied to | HR, CR |
| b. Tensile strength | b≤500Mpa, S≤300Mpa |
| c. Thickness | 0.5-2.0mm |
| d. Width | 500-1500mm (Max) |
| e. Coil ID | 508mm |
| f. Coil OD | 1600mm (Max) |
| g. Weight | 15T (Max) |
| h. Diameter of leveling rollers | 65mm |
| i. Distance of leveling rollers | 70mm |
| j. Material of leveling roller | GCr15, hardness: HRC55-60 |
| k. Total weight of machines | Around 30T |
| 2. Finished Products Parameters | |
| a. Diagonal tolerance | ≤±1mm/2000mm |
| b. Length tolerance | ≤±0.5mm/2000mm |
| 3. Other Parameters | |
| a. Power | 380V/50Hz/3Ph |
| b. Line speed | 0-60m/min |
| c. Capacity | Around 100Kw |
| d. Area of the whole production line | 25m(L) X 7m(W) |
| e. People of operation | 1 technician and 2 general workers |
| f. Color of the machines | Grass green |
| 1. | Hydraulic coil car |
| 2. | Hydraulic decoiler |
| 3. | Slitting machine |
| 4. | Scrap winder |
| 5. | Tension stand |
| 6. | Hydraulic recoil |
| 7. | Unloaded car |
| 8. | Hydraulic control system |
| 9. | Electric control system |
details of roll slitting machine
|
Hydraulic de-coiler with car It adopts the hydraulic oil cylinder to make the decoiler expandable and fit to the inner diameter of coils. It is equipped with the cantilever. inner diameter: 508mm . The Max width:1500mm The capacity is 15Tons (max) |
|
pre-leveling machine It can straighten the rough plate and guide strip right after entering the process Mechanical structure: it is composed of two rows leveling roller, two rows middle supporting roller, 2 groups of supporting rollers, driving device, 2 pinch rollers and frame. Each roller both of ends drive with roller pin bearing, the working rollers can be adjusted the gap electrically which is controlled by 2 hand wheels to ensure the leveling quality. Driving model: driven by 55kw frequency control motor Roll process:hardened HRC55-60 -finishing grinding- hard chromium plating Automatic lubrication system |
|
Servo precision straightening machine It is controlled by servo electromotor and used to regulate for high speed feed and precise length control. The operation is done at the control table with programmable control. Drive model: 15 KW servo motor |
|
High speed Cutter 1). The width range :200--1300mm 2). The precious of the width:±1mm 3). The speed of slitting:50m/min 4). The width can be change. 5). Material of the slitting: Cr12MoV. Hardness of slitting blade:HRC5860. 6).slitting:2~3mm 6 lines. 7).quantity of blades:10 sets . 8).Width of side scrap:3-15mm 9).The precious of side scrap:±0.5mm 10).Quantity of side scrap:2 strips 11).Power of the slitting:37KW,1000r/min,with ZQ750 Reducer. |
|
Pneumatic stacker device The plates are piled pneumatically and PLC controls the lifting. Three 0.75kw motors drag to adjust the width and the length. It is equipped with the wind device which cooperates with the high pressure fan to prevent the sheets from friction. stress of air source: 0.4-0.6Mpa. The capacity:1m³ /min. |
|
Electrical system 1). Screen:3.2inch button screen 2). PLC:Delta |
The foundation engineering of the equipment
The seller will provide the buyer the foundation plan of the equipment in 60 days after signing the contract.
The construction and monitoring of all the foundation engineering of the equipment are in the control of the buyer.
The foundation holes are reserved holes, to match the foot holes of equipment.
After the equipment has been installed, the buyer is responsible for the foundation hole irrigation mud.
Remark
1. In the guarantee equipment main technical parameters and installed level, the user and consultation, and manufacturing process has the right to modify some parameters
2. Seller needs to supply the following items
(1) Mechanical foundation installation drawing and production line arrangement as well as the operation manual.
(2) All the below spare parts are provided with the machine, any extra spares, that would be ready by the customer self.
Botou Zhongke Roll Forming Machine Factory was founded in 1996, is a professional production of heavy machinery and equipment of large enterprises. After years of development, we have now developed into a large enterprise integrating scientific research, development, production, sales and service. Our products are involved in all fields of heavy machinery and equipment, and are in a leading position in the heavy machinery industry. The products we produce have also been well received by users.
Now the large hydraulic Roll Forming Machines produced by our company has reached the international advanced level, especially the patented product developed by our company (ZL200910302633.6), which has won the National Science and Technology Innovation Award and the National Key New Product Award. This has not only promoted the development of China's heavy machinery and equipment industry, but also won more honors for our company.
In line with the principle of "people-oriented, innovation and truth seeking", with the purpose of "quality first, customer first, quality service, abide by the contract", with strong economic strength, advanced management mode, strong technical force, perfect testing means and reliable quality assurance system, we are dedicated to provide quality services for our customers. We warmly welcome new and old customers to visit our factory and guide our work. We sincerely look forward to working with you to create a better tomorrow!
1. Equipment introduction
Tile press is the use of hydraulic transmission, with steel plate, section steel, Angle steel and other raw materials, through automatic feeding, forming, cutting, stripping and other processes to make a variety of specifications of color steel tile. Suitable for all kinds of building roofing color steel tile forming. Because the tile press is two or more presses connected into one through the hydraulic transmission system, it is called the hydraulic tile press.
The working process of the tile press is that the steel coil is sent by the feeding mechanism to the forming mechanism, which will stretch the steel plate, section steel or Angle steel and other materials, and then the tile blank is demoulded by the demoulding mechanism. Because the mechanism adopts hydraulic transmission, it is also called hydraulic tile press. During the molding process, the pressure oil in the hydraulic cylinder is transported to the oil cylinder by the oil pump through the oil cooler, and the oil in the oil cylinder is cooled and returned to the oil pump through the oil pipe. In addition, the mechanism can also heat treat the billet after heating and cooling. After heat treatment, the billet is sent to the cutting line by conveyor belt. After cutting, the cutting line is sent to the top material area.
Second, equipment characteristics
1, the machine is hydraulic automatic, through the expansion of the hydraulic cylinder and the movement of the upper and lower pressure head to achieve the pressing of the tile;
2, the equipment operation is simple, automatic production, save the trouble of manual operation and handling tile;
3, the product specifications and sizes of the machine are complete, suitable for the production of various specifications of tiles;
4, the machine adopts a pressing molding process, can ensure the accuracy and consistency of tile size, high production efficiency, low labor cost;
5, the equipment structure is compact, small footprint;
6, high degree of equipment automation, saving labor costs;
7, the equipment covers a small area, fast and convenient installation;
8, can be equipped with hydraulic system according to customer requirements. We have experienced technicians and engineers to design various specifications and models of tile presses;
9, the machine adopts hydraulic transmission and PLC control system, high degree of automation;
10, the use of hydraulic cylinder as the power of the upper and lower pressure head, so the production efficiency is high;
11, the equipment adopts double head feeding and pressing tile, so the product quality is good. The factory uses a variety of safety protection devices (such as emergency braking) to protect staff and equipment;
Third, equipment advantages
1, advanced production equipment: advanced hydraulic transmission, high precision, fast production speed;
2, perfect detection means: the whole factory implements microcomputer automatic management, and in line with international standards;
3, advanced technology: the use of two-stage hydraulic pressing molding, with high density, strength, light weight and other advantages;
4, perfect after-sales service: 24 hours to open the telephone line, 24 hours to arrive at the scene to provide technical support;
5, sound quality management system: from design to production, the implementation of total quality management, in strict accordance with ISO9001:2000 standards.
6, perfect sales network: The factory through the establishment of close relations with dealers throughout the country, timely understanding of market dynamics.
7, high quality product quality: Our factory adhere to the "customer satisfaction" for the purpose, in strict accordance with the ISO9001 standard implementation. Established a strict quality management system to ensure product quality.
Customized Solutions: We understand that each client's needs are unique. Therefore, we offered tailored solutions to meet the specific requirements of our Tanzanian, Kyrgyzstani, and Mongolian clients. For instance, we customized the double/triple-layer machines for the Tanzanian client to suit their production capacity and space constraints. Similarly, we ensured that the light steel keel machines and multiple keel machines purchased by our Kyrgyzstani and Mongolian clients were designed to meet their local building codes and standards.
Technical Support and Training: To ensure smooth operation and maintenance of the machines, we provided comprehensive technical support and training to our clients. Our experts conducted on-site training sessions, demonstrating how to operate and maintain the machines effectively. Additionally, we provided detailed manuals and troubleshooting guides to assist our clients in resolving any issues that may arise in the future.
After-Sales Service: We take pride in our after-sales service, offering continuous support to our clients even after the machines have been delivered and installed. Our dedicated customer service team is available 24/7 to address any concerns or questions our clients may have. We also offer regular maintenance checks and repairs to ensure the machines remain in optimal working condition.
Timely Delivery and Installation: We understand the importance of timely delivery and installation, especially in the construction industry. Therefore, we ensured that the machines were delivered to our clients' locations on schedule. Our professional installation team then worked diligently to set up the machines, ensuring they were ready for use as soon as possible.
Cost-Effective Solutions: We strive to provide our clients with cost-effective solutions that maximize their investment. By offering competitive pricing, flexible payment terms, and discounts for bulk purchases, we ensured that our clients received high-quality machines without breaking the bank. Additionally, we provided ongoing support and maintenance to minimize downtime and extend the lifespan of the machines, further enhancing their cost-effectiveness.
Hi This is Vicky from Zhongkuo Roll Forming Machine Factory!Nice to see you here ,please tell me your intrested machine
){kind=link}